Dahua DH-PFM906-E – 7″ Multifunction CCTV Camera Installation Tester
| Model | DH-PFM906-E |
| Manufacturer | Dahua Technology |
| Product Type | Integrated Camera Installation Tester |
| Product Category | CCTV Testing and Installation Equipment |
| Operating System | Android |
| Display Type | Capacitive IPS Touchscreen |
| Display Size | 7 Inches |
| Display Resolution | 1920 × 1080 (Full HD) |
| Control Interface | Touchscreen and 14 Physical Keys |
| Supported Languages | 13 Languages, Including English |
| IP Camera Compatibility | Dahua Private Protocol and ONVIF |
| IP Camera Resolutions | 1 MP, 1.3 MP, 2 MP, 3 MP, 4 MP, 5 MP, 6 MP, 8 MP, 12 MP |
| IP Camera Video Compression | H.264, H.265 |
| IP Camera Functions | Live View, Snapshot, Recording, Zoom, Initialization |
| IP Camera Configuration | IP Address, Resolution, Password and Factory Reset |
| Analog Video Formats | HDCVI, HDTVI, AHD, CVBS |
| Maximum HDCVI Resolution | 4K @ 30 fps |
| Maximum HDTVI Resolution | 4 MP @ 30 fps |
| Maximum AHD Resolution | 4 MP @ 30 fps |
| CVBS Support | PAL, NTSC |
| SDI Support | 720p @ 60 fps, 1080p @ 60 fps, 1080i @ 60 fps |
| HDMI Input | 1 × HDMI, Up to 4K @ 30 fps |
| HDMI Output | 1 × HDMI |
| Ethernet Ports | 2 × RJ45 (10/100/1000 Mbps) |
| PoE Testing | PoE/PSE Voltage and Connection Status |
| PoE Power Output | Supported |
| DC Power Output | 12V DC, 2A |
| USB Power Output | 5V DC, 2A |
| Wi-Fi Standard | IEEE 802.11a/b/g/n/ac |
| Wi-Fi Frequencies | 2.4 GHz and 5 GHz |
| Wi-Fi Hotspot | Supported |
| Network Diagnostic Tools | IP Scan, Ping, Bandwidth Test, Port Flashing, Link Scan |
| Cable Testing | TDR Network Cable Test |
| Cable Fault Detection | Open Circuit, Short Circuit, Fault Location |
| Cable Tracing | Supported |
| Cable Test Parameters | Length, Attenuation, Latency Skew, Impedance, Reflectivity |
| Optical Power Meter | Integrated |
| Optical Power Meter Detector | InGaAs |
| Optical Wavelengths | 850, 1300, 1310, 1490, 1550, 1625 nm |
| Optical Power Measurement Range | -70 to +10 dBm |
| Optical Power Meter Connector | FC/PC |
| Visual Fault Locator (VFL) | Supported |
| Digital Multimeter | Integrated |
| Multimeter Functions | AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Continuity, Diode, Frequency |
| Maximum Current Measurement | 10A |
| RS-485 Control | Supported, Over 30 Protocols |
| PTZ Protocols | Pelco-D, Pelco-P, Samsung, Panasonic and Others |
| Audio Ports | 1 Input / 1 Output |
| BNC Interfaces | 4 |
| USB Interface | 1 × USB Type-A |
| Storage Expansion | MicroSD Card, Up to 32 GB |
| Battery Type | Replaceable Lithium Polymer |
| Battery Capacity | 37 Wh |
| Battery Operating Time | Approximately 8 Hours |
| Charging Input | 12V DC, 2A |
| Surge Protection | ±2 kV Common Mode / ±1 kV Differential Mode |
| ESD Protection | ±8 kV Air / ±6 kV Contact |
| Operating Temperature | -10°C to +55°C |
| Storage Temperature | -20°C to +70°C |
| Operating Humidity | 30%–90% RH |
| Product Dimensions | 270 × 160 × 46 mm |
| Net Weight | 0.95 kg |
| Gross Weight | 2.1 kg |
| Color | Yellow |
| Certifications | CE, FCC |
| Application | CCTV Installation, Camera Configuration, Network Testing and Maintenance |















There are no reviews yet.