Accessories
Showing 1–15 of 21 results
-
Accessories, PARADOX
307USB Direct Connect Interface Module
- Incorporates a USB port and a serial port (DB-9)
- Enables control panel to communicate with a PC at 60m (200ft)
- Connect from the control panel’s serial port connector to a PC’s serial (DB-9) or USB port
- Includes 3 LED status indicators (PC, Panel and RX/TX)
- Communication speed:
- 6k baud (MAGELLAN)
- 4k baud (EVO)
- 6k baud (MG series and Spectra SP series)
SKU: 307USB -
-
Accessories, PARADOX
CV4USB RS-485/RS-232 Converter Kit
- Incorporates a USB port and a serial port (DB-9)
- Enables control panel to communicate with a PC at 300m (1000ft)
- Connect from the control panel’s serial port connector to PC’s serial port (DB-9) or USB port
- 4k baud communication (EVO) or 19.2k baud communication (DGP-848)
- Compatible with EVO Series, Spectra SP Series, MG5000, MG5050 and MG5075.
SKU: CV4USB -
-
-
Accessories, PARADOX
PRT3 Integration Module
- In-field firmware upgradeable via a CONV4USB and WinLoad
- Supports ASCII / C-BUS protocols
- 16 virtual inputs to trigger an action in the EVO control panel based on an event received from the peripheral system using ASCII or C-BUS protocol
- 30 virtual PGMs to trigger an action in the peripheral system using ASCII or CBUS protocol based on an event received from the EVO control panel
- USB port for PC connections
- Provides an interface between an EVO control panel and a third party peripheral system
- Automatically/manually print reports of zones/systems event via printer and/or PC
- Parallel and serial port for printer connections
- Assign to one or more partitions
- 2048 event buffer
- Available in English
SKU: PRT3 -
Accessories
RPT1 MAGELLAN Wireless Repeater Module
- Built-in transceiver (433MHz)
- Allows to extend the range of wireless communications
- Supports all MAGELLAN transmitters
- Select which zone, PGM and/or keypad signals are repeated
- Signal strength display
- Universal transmitter input (N.O./N.C.)
- In-field firmware upgrade via 307USB
- Wireless range in a typical residential environment:
- 75m (240ft) with 433MHz;
- 50m (160ft) with 868MHz
- AC input (16Vac, 20VA)
- Fits in 20cm x 25.5cm x 7.6cm (8in x 10in x 3in) and 28cm x 28cm x 7.6cm (11in x 11in x 3in) metal boxes
- Compatible with MG5000 / MG5050 / MG5075 / RTX3
- Note: The RPT1 is not supported by the RTX3 when connected to an EVO panel.
SKU: RPT1 -
Accessories, PARADOX
RPT1+ Wireless Repeater Module
- Built-in Transmitter / Receiver (433Mhz)
- Compatible with all transmitters / receivers in the Magellan range
- Select the signal to be repeated (zone / PGM / keyboard)
- Displays the received signal strength
- 1 programmable relay output, 5A
- 1 universal area entrance
- Wireless distance: 75m through 433 MHz in residential space
- Power supply: 16Vac, 20VA
SKU: RPT1+ -
Accessories, PARADOX
RX1 Wireless Receiver
- Compatible with SP Series control panels (V4.54 and higher)
- 32 wireless zones (SP Series only)
- Maximum number of remote controls: 32
- Remote control compatibility: REM1, RAC1
- Transmitter compatibility: DCT10, DCTXP2, DCT2, PMD1P, PMD75, PMD85, SD738 (SP only)
- In-field firmware upgradable via In-Field Firmware Upgrade software
- RF jamming supervision
- Low battery, tamper, and check-in supervision
- Transmitter signal strength display
- 2 PGM outputs follow buttons 1 and 2 on REM1/RAC1 (also programmable through the panel)
SKU: RX1
