Elevatror Controllers, HIKVISION
DS-K2M0016A Distributed Elevator Controller
- Distributed elevator controller
- Connectable with up to 16 relays to control floor buttons in the elevator
- RS-485 communication with the master elevator controller
- DIP switch settings for device address and relay types
- Up to 8 distributed elevator controllers can be linked to the master elevator controller
- Control the elevator via the relay
376.55 € excl. VAT
Hikvision DS-K2M0016A Distributed Elevator Controller
| System Parameters | ||
| Processor: | 32-bit | |
| Device Interfaces | ||
| Input Interface: | 2 Alarm Inputs | |
| Output Interface: | 16 Relay Outputs | |
| RS-485 Interface: | 2 | |
| Buzzer: | 1 | |
| General | ||
| Installation: | Guide Rail Installation | |
| Temper-Proof: | Support | |
| Working Humidity: | 10% to 90% (Non-Condensing) | |
| Working Temperature : | -40°C to +70°C (-40°F to +158°F) | |
| Dimensions (L×W×H): | 167mm × 105mm × 30mm | |
Based on 0 reviews
Be the first to review “DS-K2M0016A Distributed Elevator Controller”
Related products
-
HIKVISION, Modules and Accessories
DS-K2M061 Secure Door Control Module
- Communicates with the access control terminal via RS-485 to execute the commands from the terminal including open door, close door, normally open and normally closed
- Collects the door magnetic signal, the exit button signal and the tamper-proof signal and send them to the access control terminal
- Supports tampering alarm
- Supports RS-485 communication indicators to show the communication status
- 4-ch DIP switch supporting ID No. configuration
- Supports a Wiegand interface to connect a Wiegand card reader to enter/exist access control terminal by swiping card
- Fire interface and exit button linkage
SKU: DS-K2M061 -
HIKVISION, Access Controllers
DS-K2601T(O-STD) Network Access Controller
- Access controller
- 100,000 cards and 300,000 events storage
- ISAPI, OSDP supported
- Communication via TCP/TP
- 1 door access control
- Alarm input/output and alarm event upload
- RS485 interface and Wiegand interface for accessing card reader
SKU: DS-K2601T(O-STD) -
HIKVISION, Access Controllers
DS-K2802 Network Access Controller
- Access controller
- 10,000 cards and 50,000 events storage
- 2 doors access control
- Communication via TCP/TP
- Alarm input/output and alarm event upload
- Wiegand interface for accessing card reader
- European AC power cable included
SKU: DS-K2802 -
HIKVISION, Standalone Terminals
DS-K1TA70MI-T MinMoe Temperature Screening Terminal
- Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C
- Recognition distance: 0.3 to 1.8 m
- Face mask detection
- Displays temperature measurement results on the authentication page
- 7-inch LCD touch screen,2 Mega pixel wide-angle lens Built-in Mifare card reading module
- Face recognition duration ＜ 0.2 s/User
- Face recognition accuracy rate ≥ 99%
- 6000 face capacity, 6000 card capacity, and 100,000 event capacity
SKU: DS-K1TA70MI-T
There are no reviews yet.