R125USB – Card Enrolment Unit
The R125USB will be automatically recognized by the ATRIUM and CENTAUR access control systems once connected to the USB port of your PC. Simply present the badge in front of the unit and the code is transmitted into the PC in the cardholder file. The R125USB is used to quickly add cards to the system.
Based on 0 reviews
Be the first to review “R125USB – Card Enrolment Unit”
Related products
-
CDVI, Software
Centaur – Professional Edition Software
- Up to 512 doors per site
- 64 sites
- 8,196 cards per site
- 64 controllers per site
- 128 elevator cabs per site
- 64 floors per cab
- 128 floor groups per site
- Include one workstation license
- Include these built-in integration:
– DVR/NVR/VMS: View live or recorded video within Centaur. Every Centaur event can be associated to a specific camera (Digital WatchDog, Exacq or Milestone).
– SAP: Automatically add, delete or modify Centaur’s card database from an external SAP application.
– Pro-Report: On demand, scheduled or customized reports
– FrontView: Live interactive floor plans
– Front Guard: Display real-time visual authentication
– FrontDesk: Add, delete, modify & print cards, including Photo-ID
– Locator: Monitor real-time location of each card holder
– WavePlayer: Play a sound on any system event
SKU: CS-PRO6 -
CDVI, Card Readers
DGLI WLC26 Multi-Technology Wiegand Proximity Card Reader
- Stainless steel
- Dust, weather and vandal resistant
- Can read: CDVI®, Centaur and most popular 26-bits badge & card format
- Indoor/Outdoor application
- Surface mount
- Up to 7.5 cm (3 in) read range
- Red/Green LEDs and Buzzer
- Operating temperature: -30°C to 60°C
- Power requirements: 12Vdc
SKU: DGLI/WLC -
CDVI, Modules
CA-A360-USB CAB – USB to RS-485 Converter
- Converts RS-485 protocol to USB or RS-232 protocol
- Communicate with a CT-V900-A controller up to 1220m (4000ft) away.
- Utilizes 2 twisted pair UTP cable (Cat 5)
- Transmit, Receive and Power status LEDs
- On-board End-Of-Line (EOL) and BIAS jumpers
- 2m (6ft) 9-Pin D-Sub RS-232 connector included
- Power Requirements: 12VDC or via USB PC port
- Current consumption: 100mA max.
- Selectable baud rate: 9600 or 19200 bps
SKU: CA-A360-USBRS -
CDVI, Controllers and Expansion Modules
CT-V900-A – 2-Door Controller
- Control 2 doors (Reader In / REX Out) or 1 Door (Reader In / Reader Out)
- Add up to 6 more doors to the CT-V900-A using the CA-A470-A expansion module
- 10,920 on-board card database
- 256 Schedules
- 256 Access Levels
- 2048 Event Buffer
- 16 on-board inputs (*using ATZ 2R/3R)
- 2 on-board 12 Vdc or 24 Vdc field-selectable lock outputs
- 2 on-board Form C dry contact relay outputs (N/O – N/C)
- Fully distributed database architecture (access decisions made locally)
- Flash firmware – Upload firmware via the Centaur Server
- E-Bus technology add-on hardware modules can be up to 1220m (4000ft) away from the CT-V900-A
- 2.5A switching power supply
- Supports common Wiegand, Track 2 ABA (mag stripe) and BCD (keypad) formats
- Easy maintenance with snap-off terminal blocks
- Battery backup functionality (2 x 12V 7AH gel-type batteries)
- Lithium battery protection in case of complete power failure
SKU: CT-V900-A
There are no reviews yet.