Paradox 307USB Direct Connect Interface Module

307USB Direct Connect Interface Module

  • Incorporates a USB port and a serial port (DB-9)
  • Enables control panel to communicate with a PC at 60m (200ft)
  • Connect from the control panel’s serial port connector to a PC’s serial (DB-9) or USB port
  • Includes 3 LED status indicators (PC, Panel and RX/TX)
  • Communication speed:
    • 6k baud (MAGELLAN)
    • 4k baud (EVO)
    • 6k baud (MG series and Spectra SP series)

49.40  excl. VAT

Paradox 307USB Direct Connect Interface Module

Paradox 307USB Direct Connect Interface Module: The Direct Connect Interface (307USB) allows for direct on-site communication between a computer and a control panel. It can also be used to upgrade your control panel’s firmware.


• All EVO control panels
• MG6250
• Spectra SP Series
• MG5000 / MG5050
• NEware end-user management software
• BabyWare PC software

USB Connection and Setup

If using a USB cable instead of a 9-pin serial cable (DB-9) to connect to the computer, the USB driver must first be installed on the computer.

1. After downloading the USB drivers from the Paradox website, extract the appropriate .zip file (Paradox_USB_Drivers_Win7 ZIP or Paradox_USB_Drivers_Win2000_XP_Vista ZIP or Paradox_USB_Drivers_XP64_Vista64 ZIP) to the computer.
2. Connect the USB cable from the 307USB module to a USB port on the computer.
3. Follow the on-screen instructions. You will need to browse the computer when prompted for the required files.


SKU: 307USB Categories: ,

Based on 0 reviews

0.0 overall

Be the first to review “307USB Direct Connect Interface Module”

There are no reviews yet.