L bracket for 300 Series
Dimensions – length 248 mm
Dimension – width 50 mm
Dimension – depth 30 mm
Based on 0 reviews
Be the first to review “L bracket for 300 Series”
Related products
-
CDVI, Modules
CA-A360-USB CAB – USB to RS-485 Converter
- Converts RS-485 protocol to USB or RS-232 protocol
- Communicate with a CT-V900-A controller up to 1220m (4000ft) away.
- Utilizes 2 twisted pair UTP cable (Cat 5)
- Transmit, Receive and Power status LEDs
- On-board End-Of-Line (EOL) and BIAS jumpers
- 2m (6ft) 9-Pin D-Sub RS-232 connector included
- Power Requirements: 12VDC or via USB PC port
- Current consumption: 100mA max.
- Selectable baud rate: 9600 or 19200 bps
SKU: CA-A360-USBRS -
CDVI, Controllers and Expansion Modules
CT-V900-A – 2-Door Controller
- Control 2 doors (Reader In / REX Out) or 1 Door (Reader In / Reader Out)
- Add up to 6 more doors to the CT-V900-A using the CA-A470-A expansion module
- 10,920 on-board card database
- 256 Schedules
- 256 Access Levels
- 2048 Event Buffer
- 16 on-board inputs (*using ATZ 2R/3R)
- 2 on-board 12 Vdc or 24 Vdc field-selectable lock outputs
- 2 on-board Form C dry contact relay outputs (N/O – N/C)
- Fully distributed database architecture (access decisions made locally)
- Flash firmware – Upload firmware via the Centaur Server
- E-Bus technology add-on hardware modules can be up to 1220m (4000ft) away from the CT-V900-A
- 2.5A switching power supply
- Supports common Wiegand, Track 2 ABA (mag stripe) and BCD (keypad) formats
- Easy maintenance with snap-off terminal blocks
- Battery backup functionality (2 x 12V 7AH gel-type batteries)
- Lithium battery protection in case of complete power failure
SKU: CT-V900-A
There are no reviews yet.