Access Control, HIKVISION, Standalone Terminals
DS-K1T802 Access Control Terminal
- Standalone access control card terminal
- 3000 card and 10000 event storage
- Access control function
- Communication via TCP/TP
- Offline event alarms upload
65.45 € excl. VAT
Hikvision DS-K1T802 Access Control Terminal
| System Parameters | ||
| Card Type: | Mifare Cards, EM cards | |
| Storage: | 3,000 Valid Card Information and 10,000 Event Records | |
| Processor: | 32-bit | |
| Device Interfaces | ||
| Input Interface: | Exit Button × 1, Door Sensor × 1 | |
| Communication Mode: | TCP/IP | |
| Output Interface: | Doorbell × 1, E-lock Output × 1 | |
| General | ||
| Display screen: | STN Screen (Resolution 128*64) | |
| Key Board: | 13 Keys (0-9, , *, #, Doorbell) | |
| Working Voltage: | 12V DC | |
| Working Current: | 0.17A (without Load) | |
| Prompt: | Beeper | |
| LED Indicator: | Power/Status | |
| Working Humidity: | 10% to 90% (Non-Condensing) | |
| Working Temperature : | -20°C to +65°C (-4°F to +149°F) | |
| Dimensions (L×W×H): | 126.5mm × 94.5mm × 24mm (4.98″ × 3.72″ × 0.94″) | |
| Optional: | Model for Mifare cards, Model for cards EM 125 kHz |
|---|
Based on 0 reviews
Be the first to review “DS-K1T802 Access Control Terminal”
Related products
-
HIKVISION, Standalone Terminals
DS-K1TA70MI-T MinMoe Temperature Screening Terminal
- Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C
- Recognition distance: 0.3 to 1.8 m
- Face mask detection
- Displays temperature measurement results on the authentication page
- 7-inch LCD touch screen,2 Mega pixel wide-angle lens Built-in Mifare card reading module
- Face recognition duration ＜ 0.2 s/User
- Face recognition accuracy rate ≥ 99%
- 6000 face capacity, 6000 card capacity, and 100,000 event capacity
SKU: DS-K1TA70MI-T -
-
HIKVISION, Modules and Accessories
DS-K2M060 Secure Door Control Unit
- Secure module
- Communicates with the access control terminal via RS-485
- Connects door magnetic signal, exit button signal and tamper-proof signal
- Supports RS-485 communication indicators to show communication status
- Supports a Wiegand interface to connect a Wiegand card reader to enter/exit access control terminal by swiping card
- Accessible Card Reader: 1 Wiegand reader, Uplink Communication Interface: RS-485 Interface
- Input interface: Door Magnetic×1, Door Switch×1, Tamper-proof×1
- Output interface: Door Switch Relay×1, Alarm Relay×1.DC 12V.
SKU: DS-K2M060
There are no reviews yet.