Access Control, HIKVISION, Standalone Terminals
DS-K1T105 Standalone Access Control Terminal
- IP addresses conflicted alarm
- Supports uploading real-time events
- Gets offline events: Avoids events losing
- Touch mode and blue light display technique for keypad
- Stand-alone settings for the terminal
- 2.8-inch LCD display screen to display the time, the date, etc.
- Max. 100,000 valid card capacity, and Max. 300,000 access control events capacity
- Communication via wired network (TCP/TP) and Wi-Fi
- Supports ISUP5.0 protocol for public network communication
- Supports multiple door opening modes (card, card + password, exit button, etc.)
- Supports RS-485 and Wiegand (26/34) communication for connecting the external card reader
- Applies authentications from the client to the device
- Supports Wiegand (26/34) interface and RS-485 interface for accessing the controller
- Supports Mifare card reading
- M1 card encryption
116.45 € excl. VAT
Hikvision DS-K1T105 Standalone Access Control Terminal
| System Parameters | ||
| Valid Card/ Swiping Record: | 100,000 Cards and 300,000 Swiping Card Records | |
| Operation System: | Linux | |
| Built-in Micro SD Card: | Max.32G | |
| Card Reading Frequency: | EM Card (DS-K1T105AE(D-STD): 125KHz; Mifare Card (DS-K1T105AM(D-STD): 13.56MHz |
|
| Camera: | 2MP (Optional) | |
| Storage: | 256M Storage | |
| Card Reading Mode: | Supports EM card reading (DS K1T105E/E-C) Supports Mifare card reading, including card No. reading & writing function (DS-K1T105M/M-C) |
|
| Processor: | ≥1GHz, 32 Bit High-performance Processor | |
| Device Interfaces | ||
| Transmission Rate: | TCP/IP, WIFI: 10/100Mbps Self-adaptive, RS-485: 19200 bps-N-8-1 |
|
| Input Interface: | Tamper Alarm × 1, Exit Button × 1, Door Sensor × 1, Alarm Input × 2 | |
| Communication Mode: | TCP/IP, Wi-Fi, RS-485, and Wigand 26/34 (under the card reader mode only) | |
| Output Interface: | Lock Relay × 1, Alarm Relay × 1 | |
| Accessible Card Reader: | Card Reader | |
| General | ||
| Power Supply: | 12VDC | |
| Audio: | Loudspeaker | |
| Key Board: | Keyboard (Back light) | |
| LCD Screen: | 320×240 LCD-TFT Display Screen | |
| Working Current: | 500mA ( without Locks) | |
| LED Indicator: | Power/Status | |
| Certification: | CE, FCC | |
| Working Humidity: | 10% to 90% (Non-Condensing) | |
| Working Temperature : | -20°C to +65°C (-4°F to +149°F) | |
| Dimensions (L×W×H): | 122mm × 82mm × 23mm (4.8” × 3.2” × 0.9″) | |
| Weight: | 280g (9.88lb) | |
| Optional: | Model for Mifare cards, Model for cards EM 125 kHz |
|---|
Based on 0 reviews
Be the first to review “DS-K1T105 Standalone Access Control Terminal”
Related products
-
-
HIKVISION, Access Controllers
DS-K2604T(O-STD) Network Access Controller
- Access controller
- 100,000 cards and 300,000 events storage
- ISAPI, OSDP supported
- Communication via TCP/TP
- 4 doors access control
- Alarm input/output and alarm event upload
- RS485 interface and Wiegand interface for accessing card reader
SKU: DS-K2604T(O-STD) -
HIKVISION, Modules and Accessories
DS-K2M061 Secure Door Control Module
- Communicates with the access control terminal via RS-485 to execute the commands from the terminal including open door, close door, normally open and normally closed
- Collects the door magnetic signal, the exit button signal and the tamper-proof signal and send them to the access control terminal
- Supports tampering alarm
- Supports RS-485 communication indicators to show the communication status
- 4-ch DIP switch supporting ID No. configuration
- Supports a Wiegand interface to connect a Wiegand card reader to enter/exist access control terminal by swiping card
- Fire interface and exit button linkage
SKU: DS-K2M061 -
HIKVISION, Modules and Accessories
DS-K1201AMF Fingerprint Card Reader
- A group of messy code encrypted data for the security of fingerprint storage
- Supports RS-485 communication with 19200bps-N-8-1 transmission rate. There are CRC test for the protocol
- Supports M1 card reading
- Card induction distance is 30 mm to 100 mm
- Supports multiple authentication modes (card, fingerprint, and card + fingerprint)
- Optical CMOS fingerprint module. The characters of fingerprint can be export to the card reader
- Max. 5000 fingerprints storage
- Adopts the optical fingerprint module, supporting 1:N mode (fingerprint, card + fingerprint) and 1:1 mode (card + fingerprint)
- Fingerprint comparison time: 1:1 ≤ 1 s, 1:1000 ≤ 1 s; FRR ≤ 0.01%, FAR ≤ 0.001%
- Communication circuit is designed with optical coupling isolation and noise suppression function
- Built-in buzzer for status indication
- Accurate data and time display provided by built-in electronic clock and watchdog program to ensure the basic function of the terminal
- Tamper-proof function
SKU: DS-K1201AMF
There are no reviews yet.