Features:
- Classification: Transponder for communication with the monitoring console via VHF transmitter
- Installation: Indoors
- Number of potential outputs: 8
- Output types: High-potential and low-potential (depends on settings)
- Transmission types: Pulse and bistable (depends on zone type)
- Recommended VHF transmitters: Hawk VHF Alarm Transmitter by FSK Electronics, TX750C by RDC, TR-41 by Puper
- Compatibility with Ajax control panels: Works with Hub 2, Hub Plus, Hub 2 Plus, Hub Hybrid
- Compatibility with Ajax repeaters: ReX, ReX 2
- Compatibility with third-party VHF transmitters: Any VHF transmitter with relay inputs can be connected to the vhfBridge
- Support for transmitting photo verification alarms: No
- Mains power: 100-240V, 50/60Hz
- Backup power: 12 V—, up to 75 hours of transponder and transmitter power
- Supported battery type: 12V battery with a full charge cycle of up to 30 hours.
- Maximum battery size for installation in the case: 150×64×94 mm
- Recommended battery type: 12V battery with a capacity of 4Ah or 7Ah
- Backup battery: not included
- Power supply for VHF transmitter: 12 V, 2 A
- Anti-tampering: Floor protection, Jamming notification, Opening and tear-off tampers, Backup battery
- Radio protocol: Jeweller
- Communication range: up to 1800 m in the absence of obstacles
- Frequency ranges: 866.0 – 866.5 MHz; 868.0 – 868.6 MHz; 868.7 – 869.2 MHz; 905.0 – 926.5 MHz; 915.85 – 926.5 MHz; 921.0 – 922.0 MHz (depends on sales region)
- Self-regulating radio signal power: up to 20 mW
- Block encryption: based on the AES algorithm
- Sensor polling period: 12-300 s
- Frequency hopping: +
- Protection class: IP50
- Operating temperature range: from -10 ° C to +40 ° C
- Operating humidity: Up to 75%
- Dimensions (with case): 196×238×100 mm
- Dimensions (without case): 145×89×51 mm
- Weight (with body): 840 g
- Weight (without case): 165 g
There are no reviews yet.