KNX System
Showing all 8 results
-
Alarm Systems, KNX System, SATEL
KNX-BIN24 Universal Binary Input Module
- Communication with the KNX bus via integrated bus connector
- Definable channel polarity (NO / NC)
- Configurable time of short / long button press
- Virtual channels for receiving 1-bit telegrams from other KNX bus devices
- Virtual logic channels for creating logical links between module channels
- Virtual timer channels for creating time links
- Possibility to define 20 function blocks that perform one of the available functions:
- Switch / value transmitter
- Edge response
- Dimmer
- Shutter controller
- Switching sequence
- Counter
- Scene controller
- Possibility to control each function block using any channel
- Control of several function blocks using one channel
- Control of lighting and shutters using 1 or 2 buttons (channels)
- Ability to call a scene from any channel by using 8-bit commands
- Manual operation of physical channels status by using buttons on the enclosure
- LEDs to indicate status of physical channels
- Module configuration using ETS program
- Suitable for mounting on DIN rail (35 mm)
SKU: KNX-BIN24 -
Alarm Systems, KNX System, SATEL
KNX-BSA12H Blind/Shutter Actuator
- Communication with the KNX bus via integrated bus connector
- Feedback information about the state of module and individual channels
- Selectable type of blind/shutter for each channel
- Automatic detection of blind/shutter travel time and slat adjustment time
- Weather alarms (rain, wind, frost)
- Position forcing function
- Ability to call scenes for each channel by using 1- and 8-bit commands
- Detection of blind/shutter errors (no power, incorrect position, mechanical jam, motor overheating)
- Manual control of blind/shutter travel by using buttons on the enclosure
- LEDs to indicate status of each channel/blind/shutter
- Module configuration using ETS program
- Suitable for mounting on DIN rail (35 mm)
SKU: KNX-BSA12H -
Alarm Systems, KNX System, SATEL
KNX-BSA12L Blind/Shutter Actuator
- Communication with the KNX bus via integrated bus connector
- Feedback information about the state of module and individual channels
- Selectable type of blind/shutter for each channel
- Automatic detection of blind/shutter travel time and slat adjustment time
- Weather alarms (rain, wind, frost)
- Position forcing function
- Ability to call scenes for each channel by using 1- and 8-bit commands
- Detection of blind/shutter errors (no power, incorrect position, mechanical jam, motor overheating)
- Manual control of blind/shutter travel by using buttons on the enclosure
- LEDs to indicate status of each channel/blind/shutter
- Module configuration using ETS program
- Suitable for mounting on DIN rail (35 mm)
SKU: KNX-BSA12L -
Alarm Systems, KNX System, SATEL
KNX-DIM21 Universal Two-Channel Dimming Actuator
- Communication with KNX bus via integrated bus connector
- Automatic recognition of the connected load type
- Adjustable lighting characteristic to suit the load type
- Two-stage, firmware-hardware overheating protection system
- Overload protection
- Feedback on status of module and individual channels
- Definable reaction of each channel in case of KNX voltage loss and recovery
- Definable reaction of each channel in case of voltage recovery
- Time functions (switching delay, staircase function with warning option and operating time change)
- Value forcing function
- Option to call scenes for each channel by using 1- and 8-bit commands
- Manual operation of each channel status by using buttons on the enclosure
- LEDs to indicate each channel status and signal troubles
- Module configuration using ETS software
- Suitable for mounting on DIN rail (35 mm)
SKU: KNX-DIM21 -
Alarm Systems, KNX System, SATEL
KNX-PS640 KNX Power Supply
- Wide input voltage range: 195…265 V AC (50/60 Hz)
- Output voltage for the bus: 28…30 V DC
- Short-circuit protection for AC power input
- Short-circuit and overload protection for DC power output
- LED indicators of power supply operating status
- Installation in electrical cabinets, on DIN rail (35 mm)
SKU: KNX-PS640 -
Alarm Systems, KNX System, SATEL
KNX-SA24 Universal Switch Actuator
- Communication with KNX bus via integrated bus connector
- Feedback on the state of module and individual channels
- Reaction of each channel can be defined in case of KNX bus voltage loss and recovery
- Reaction of each channel can be defined in case of mains voltage recovery
- Time functions (flashing, on/off delay, staircase light function with advance warning option and operating time change)
- Logic functions (AND, NAND, OR, NOR, XOR, XNOR)
- Threshold value function
- Safety functions
- State forcing functions
- Scenes for each of the channels can be called up by using 1- and 8-bit commands
- Manual control of each channel state by using buttons situated on enclosure
- Status LEDs for each channel
- Capability of switching between resistive, inductive and capacitive loads
- Module configuration using ETS software
- Suitable for mounting on DIN rail (35 mm)
SKU: KNX-SA24 -
Alarm Systems, KNX System, SATEL
KNX-SA41 Universal Switch Actuator
- Communication with KNX bus via integrated bus connector
- Feedback on the state of module and individual channels
- Reaction of each channel can be defined in case of KNX bus voltage loss and recovery
- Reaction of each channel can be defined in case of mains voltage recovery
- Time functions (flashing, on/off delay, staircase light function with advance warning option and operating time change)
- Logic functions (AND, NAND, OR, NOR, XOR, XNOR)
- Threshold value function
- Safety functions
- State forcing functions
- Scenes for each of the channels can be called up by using 1- and 8-bit commands
- Manual control of each channel state by using buttons situated on enclosure
- Status LEDs for each channel
- Capability of switching between resistive, inductive and capacitive loads
- Module configuration using ETS software
- Suitable for mounting on DIN rail (35 mm)
SKU: KNX-SA41 -
Alarm Systems, KNX System, SATEL
KNX-USB Interface
- Communication with the KNX bus via integrated bus connector
- Power supply from the KNX bus or from the computer USB port
- Galvanic isolation of the KNX system and computer
- Data transmission between the interface and the computer acc. to USB 2.0 standard
- LEDs indicating the device status
- Easy to connect and use
SKU: KNX-USB