Modules and Accessories
Showing all 7 results
-
HIKVISION, Modules and Accessories
DS-K1201AMF Fingerprint Card Reader
- A group of messy code encrypted data for the security of fingerprint storage
- Supports RS-485 communication with 19200bps-N-8-1 transmission rate. There are CRC test for the protocol
- Supports M1 card reading
- Card induction distance is 30 mm to 100 mm
- Supports multiple authentication modes (card, fingerprint, and card + fingerprint)
- Optical CMOS fingerprint module. The characters of fingerprint can be export to the card reader
- Max. 5000 fingerprints storage
- Adopts the optical fingerprint module, supporting 1:N mode (fingerprint, card + fingerprint) and 1:1 mode (card + fingerprint)
- Fingerprint comparison time: 1:1 ≤ 1 s, 1:1000 ≤ 1 s; FRR ≤ 0.01%, FAR ≤ 0.001%
- Communication circuit is designed with optical coupling isolation and noise suppression function
- Built-in buzzer for status indication
- Accurate data and time display provided by built-in electronic clock and watchdog program to ensure the basic function of the terminal
- Tamper-proof function
SKU: DS-K1201AMF -
-
-
HIKVISION, Modules and Accessories
DS-K2M060 Secure Door Control Unit
- Secure module
- Communicates with the access control terminal via RS-485
- Connects door magnetic signal, exit button signal and tamper-proof signal
- Supports RS-485 communication indicators to show communication status
- Supports a Wiegand interface to connect a Wiegand card reader to enter/exit access control terminal by swiping card
- Accessible Card Reader: 1 Wiegand reader, Uplink Communication Interface: RS-485 Interface
- Input interface: Door Magnetic×1, Door Switch×1, Tamper-proof×1
- Output interface: Door Switch Relay×1, Alarm Relay×1.DC 12V.
SKU: DS-K2M060 -
HIKVISION, Modules and Accessories
DS-K2M061 Secure Door Control Module
- Communicates with the access control terminal via RS-485 to execute the commands from the terminal including open door, close door, normally open and normally closed
- Collects the door magnetic signal, the exit button signal and the tamper-proof signal and send them to the access control terminal
- Supports tampering alarm
- Supports RS-485 communication indicators to show the communication status
- 4-ch DIP switch supporting ID No. configuration
- Supports a Wiegand interface to connect a Wiegand card reader to enter/exist access control terminal by swiping card
- Fire interface and exit button linkage
SKU: DS-K2M061 -
