Controllers and Expansion Modules
Showing all 4 results
-
Access Control, CDVI, Controllers and Expansion Modules
CA-A460-PNB Relay Expansion Module
- Adds 7 form C relay outputs (5A/28VDC) to the CT-V900-A controller
- Up to 2 CA-A460-P modules per CT-V900-A controller
- E-Bus connectivity to the CT-V900-A up to 1220m (4000ft)
- Power Requirements: 12VDC
- Current consumption: 50mA (typical), 400mA (mimum)
- Without box
SKU: CA-A460-PNB -
CDVI, Controllers and Expansion Modules
CA-A470-A – 2-Door Expansion Module
- 2 readers and/or keypads
- 2 lock outputs
- 4 Inputs (door contacts and REX devices)
- Adds 2 doors to the CT-V900-A
- Up to three CA-A470-A modules per CT-V900-A
- 6 reader outputs (Red/Green LEDs, Buzzer)
- E-Bus connectivity to the CT-V900-A up to 1220m (4000ft)
- Supports Wiegand, Magnetic Stripe Track II ABA, BCD keypad formats
- Auxiliary current: 500mA
- Power: 16VAC (40VA)
- Battery backup (Not included): 12VDC (7Ah recommended)
- Comprehensive LED status indicators
SKU: CA-A470-А -
CDVI, Controllers and Expansion Modules
CA-A480-ANB Elevator Controller
- 16 on-board floor control relays
- Fire control input
- Control up to 64 floors and 2 elevator cabs
- Destination reporting (requires CA-A482-P Destination Reporting Module)
- Connects directly to the RS-485 E-BUS
- Backup battery with selectable battery charge current
- Individual schedules per floor with on-board 12VDC power supply
- Fully supervised with comprehensive LED display
SKU: CA-A480-ANB -
CDVI, Controllers and Expansion Modules
CT-V900-A – 2-Door Controller
- Control 2 doors (Reader In / REX Out) or 1 Door (Reader In / Reader Out)
- Add up to 6 more doors to the CT-V900-A using the CA-A470-A expansion module
- 10,920 on-board card database
- 256 Schedules
- 256 Access Levels
- 2048 Event Buffer
- 16 on-board inputs (*using ATZ 2R/3R)
- 2 on-board 12 Vdc or 24 Vdc field-selectable lock outputs
- 2 on-board Form C dry contact relay outputs (N/O – N/C)
- Fully distributed database architecture (access decisions made locally)
- Flash firmware – Upload firmware via the Centaur Server
- E-Bus technology add-on hardware modules can be up to 1220m (4000ft) away from the CT-V900-A
- 2.5A switching power supply
- Supports common Wiegand, Track 2 ABA (mag stripe) and BCD (keypad) formats
- Easy maintenance with snap-off terminal blocks
- Battery backup functionality (2 x 12V 7AH gel-type batteries)
- Lithium battery protection in case of complete power failure
SKU: CT-V900-A